 |
UsedMachines-Journal.de |
   |
|||
|
|||||
|
||||||||||
 |
Milling machinesYear 1971, X: 800 mm, Y: 300 mm, Z: 300 mm, mounting table: 1000 x 440 mm, speed range: 40 - 2000 rpm, taper fixture: SK40 , sehr viel Zubehör, div. Werkzeughalter, Sägegewinde, Pos. 13636  Photo  Inquiry
milling machine manual REIDEN HF 400Year 1978, X: 1500 mm, Y: 350 mm, Z: 600 mm, table load: 1000 kg, mounting table: 2000 x 500 mm, speed range: 25 - 1250 rpm, taper fixture: ISO 50 , , 3-axis-digital-display Olivetti, feed lengthwise and across 20 to 1050 mm per min., vertical feed 6 to 315 mm per min., overhaul of guides of all axes, table overhauled, spindle run is good, very good condition, , 7 pcs. horizontal mill holder, 3 pcs. ISO50-Aufnahmen, support bearing für horizontal processing, levelling device, Pos. 10396 Photo Inquiry
milling machine manual DROOP + REIN 130 KiYear 1979, X: 1780 mm, Y: 500 mm, Z: 450 mm, 1 Teilkopf zum Kopierfräsen, Pos. 13060 Photo Inquiry
horizontal milling machine SCHARMANN FB 80 OpticutYear 1971, X: 1300 mm, Y: 1100 mm, Z: 1400 mm, table size: round table mm, taper fixture: SK40 , weight of machine: 17000 kg, 3-Achsen Digitalanzeige Heidenhain, autom. Klemmung, Zentralschmieranlage, 1 St. Vertikalfräskopf groß (montiert), 1 St. Vertikalfräskopf klein, 50 Werkzeugaufnahmen SK40, div. Ersatzteile, Pos. 12998 Photo Inquiry
knee and column milling machine OSO Olomouc FGU 32Year 2002, X: 1000 mm, table size: 360 x 1400 mm, speed range: 45 - 2000 rpm, taper fixture: SK50 , 3-Achs-Digitalanzeige ACU-RITE DRO 200 M, autom. Konsolenansenkung, Pos. 13267 Inquiry
copy milling machine Rotox KF 457Year 1990, X: 250 mm, Y: 90 mm, Z: 120 mm, weight of machine: approxim. 300 kg, space requirement (W x D x H): 0,85 x 0,65 x 1,55 m, max. Profilhöhe 130 mm, max. Profiltiefe 100 mm, Luft 8 bar, 380 V, 50 Hz, Pos. 13468 Inquiry
plano milling machine HSM-ModalYear 2008, feed: X/Y 150, Z 60 m/min, speed range: 20000 rpm, taper fixture: HSK40 , spindle drive: 12 kW, control: Bosch 3OSA , space requirement (W x D x H): 15,1 x 8,1 x 6,1 m, Hübe 3-Achs (ohne Werkzeug) 11330 x 4670 x 2000 mm, Hübe 5-Achs (ohne Werkzeug) 10838 x 4178 x 1754 mm, voll funktionsfähig, alle Führungen, Rollen u. Zahnriemen neu, Steuerung aus 2002, working hours 450, Pos. 13571 Photo Inquiry
plano milling machine KOLB PFZ-2500Year 2003, X: 5500 mm, Y: 4250 mm, Z: 1250 mm, mounting table: 4500 x 2500 mm, control: Sinumerik 850 ME 150 , Durchgang zw. den Ständern 3300 mm, Spindelhöhe über Tisch max. 1500 mm, T-Nuten 10 St. H8, T-Nuten-Abstand 200 mm, Werkzeuggewicht max. 20 t, 2 Tische, Vertikalkopf, autom. Fräskopfwechsler, Pos. 12775 Photo Inquiry
plano milling machine Wissner WiTEC 42 EconomicYear 2005, X: 4050 mm, Y: 2050 mm, Z: 250 mm, mounting table: 4200 x 2150 mm, speed range: 12 kW - 36.000 rpm, taper fixture: HSK E40 , control: MDSI 6.0 on XP computer , tool changer: 10 -station, tool diameter: 13 mm, hours of operation: 23589 h, spindle on: 7736 h, total power: 15 kW, weight of machine: 4900 kg, space requirement (W x D x H): 6,7 x 3,12 x 2,6 m, condition: good , , tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians, , overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation, Pos. 15570 Photo Inquiry
vertical milling machine DROOP + REIN FS 110 NBWYear 1975, X/Y/Z 1600/ 700/ 200 mm, Aufspannfläche 2400 x 700 mm, 6 T-Nuten, Steuerung Siemens Sinumerik 8M, Gewicht 18,5 t, Pos. 10084 Photo Inquiry
Tischfräsmaschine STEINEL SH 4Year 1960, table size: 730 x 200 mm, speed range: 63 - 1250 rpm, space requirement (W x D x H): 1,7 x 1 x 0,7 m, Links- und Rechtslauf, X-Achsen Vorschub, Starkstrom 16A, funktionsfähig, Pos. 13411 Photo Inquiry
universal tool-milling machine FP4 MYear 2017, Neumaschine !!, X: 500 mm, Y: 400 mm, Z: 400 mm, quill ram: 80 mm, Senkrecht- Fräskopf auf Spindelstock manuell verschiebbar 150 mm, Pos. 3144 Photo Inquiry
universal tool-milling machine FP4 M-SYear 2017, X: 490 (500) mm, Y: 390 (400) mm, Z: 385 (400) mm, quill ram: 80 mm, control: Heidenhain ND 780 , Senkrecht-Fräskopf schwenkbar +/-90°, auf Spindelbock manuell verschiebbar 150 mm, Pos. 11940 Inquiry
universal tool-milling machine UWF 401Year 2017, Neumaschine !!, X: 400 mm, Y: 200 mm, Z: 400 mm, table size: 300 x 700 mm, quill ram: 80 mm, speed range: 40 - 1600 rpm, taper fixture: SK40 , weight of machine: 1050 kg, Pos. 3384 Photo Inquiry
universal tool-milling machine UWF 405Year 2017, Neumaschine !!, X: 400 mm, Y: 300 mm, Z: 400 mm, speed range: 40 - 2000 rpm, taper fixture: ISO40 , weight of machine: 1300 kg, Siemens Elektrik, Pos. 3385 Photo Inquiry
universal tool-milling machine UWF 500Year 2017, Neumaschine !!, X: 500 mm, Y: 400 mm, Z: 400 mm, speed range: 40 - 2000 rpm, taper fixture: ISO40 , weight of machine: 1400 kg, Siemens Elektrik, Pos. 3386 Photo Inquiry
universal tool-milling machine UWF 910Year 2017, Neumaschine !!, X: 1050 mm, Y: 700 mm, Z: 500 mm, table size: 1663 x 460 mm, speed range: 30 - 2050 rpm, taper fixture: SK50 , weight of machine: 3800 kg, Pos. 7489 Photo Inquiry
universal tool-milling machine DECKEL FP 3Year 1976, X: 500 mm, Y: 400 mm, Z: 320 mm, spindle drive: SK40 kW, weight of machine: 1200 kg, mit starrem Winkeltisch, 3 Achsen Digitalanzeige, mit Innenzugsgewinde M16, Spindelauszüge 100 mm, Pos. 10263 Photo Inquiry
universal tool-milling machine DECKEL FP 4Year 1972, X: 700 mm, Y: 600 mm, Z: 450 mm, taper fixture: SK40 , total power: 2400 kW, mit Universal-Schwenktisch, 3 Achsen Heidenhain Digitalanzeige, mit Innenzugsgewinde M16, Pos. 10257 Photo Inquiry
universal tool-milling machine DECKEL FP 4Year 1976, X: 700 mm, Y: 600 mm, Z: 450 mm, taper fixture: SK40 , weight of machine: 2400 kg, mit starrem Winkeltisch, 3 Achsen Heidenhain Digitalanzeige, mit Innenanzugsgewinde M16, Pos. 10259 Photo Inquiry
universal tool-milling machine DECKEL KF 12Year 1958, weight of machine: 1400 kg, mit div. Werkzeug und Zubehör, inkl. Werkzeugschrank, Pos. 13436 Photo Inquiry
universal tool-milling machine HERMLE UWF 1202HYear 1995, X: 850 mm, Y: 630 mm, Z: 500 mm, rapid: 10 m/min, mounting table: 1200 x 500 mm, quill ram: 95 mm, taper fixture: SK 40 , speed range: 4200 rpm, spindle drive: 11,5 kW, tool changer: 34 -station, tool holder: HTC 34 , max. weight tool: 8 kg, max. length tool: 250 mm, tool diameter: 90 mm, control: Heidenhain TCN 426 , chip conveyor, central lubrication, total power: 23 kW, weight of machine: 6500 kg, , working area lamp, fog extraction, 3Dprobe, 2 vices, 40 tool holder, working hours 8.647, Pos. 14827 Photo Inquiry
universal tool-milling machine LAGUN FU-1Pos. 12588 Inquiry
universal tool-milling machine MACMON M 200Year 1989, X: 600 mm, Y: 310 mm, Z: 390 mm, taper fixture: ISO 40 , weight of machine: 1800 kg, space requirement (W x D x H): 1500 x 1400 x 1850 m, Tischgröße 900 x 350 mm, Tischgröße senkrecht 1030 x 250 mm, Spindeldrehzahl 37 - 1900 U/min., 18 Stufen, Vorschub 7 - 380 mm/min. 18 Stufen, Eilganggesschwindigkeit 980 mm/min., Pinolverschiebung 110 mm horizontal, Pinolverschiebung 70 mm vertikal, Motorleistung 4 kW, Netzanschluss 400 Volt, 50 Hz, 3-Achsen-Digitalanzeige, nebenstehender Schaltschrank, Kabelverdingungen gesteckt, Kühlmitteleinrichtung im Maschinenfuß, Pos. 14273 Photo Inquiry
universal tool-milling machine MONDIALE VIKING 1MAYear 1976, X: 600 mm, Y: 210 mm, Z: 425/450 mm, table size: 230 x 950 mm, feed: 0,08 - 0,2 m/min, rapid: 2 m/min, speed range: 31,5 - 1000 rpm, taper fixture: SK 40 , coolant system, documentation, total power: 2,8 kW, weight of machine: 1100 kg, space requirement (W x D x H): 1,6 x 1,5 x 1,75 m, condition: very good, less hours , , automatic feed and rapid traverse in cross-motion, Condition: little run, very good, , universal turning and tilting head, several holder and adaptors, spindle counterholder, Pos. 14586 Photo Inquiry
vertical milling machine Kunzmann HF 6/3Year 1987, X: 560 mm, Y: 230 mm, Z: 350 mm, table size: 240 x 950 mm, speed range: 30 - 2840 rpm, taper fixture: SK30 , regelmäßig gewartet, Pos. 11449 Photo Inquiry
vertical milling machine MECAL - ANTON FR 810Year 1996, Kopierfräse für Zylinder in Tür oder Fenster-Profilen, Pos. 10776 Photo Inquiry
Waagrecht-Senkrechtfräsmaschine UNION KF 5.2 WS-NCweight of machine: 3200 kg, , workpiece table 380 x 1500 mm, rapid traverse 3000 m per min., max workpiece weight 600 kg, control Heidenhain TNC 124, general overhaul, as new, Pos. 9708 Photo Inquiry
Abstand zwischen den Spindeln von 100 mm bis min. 550 mm, Breite Untertisch ca. 700 mm, Verfahrweg min. 1500 mm, Motorleistung ca. 20 kW, zum Planfräsen von Metallblöcken Abm. (LxBxMat.Stärke) 550x450x250 mm, Pos. 3516-S Inquiry
Request for bevel gear generator SARATOV 525, Max. gear wheel diameter, mm 500 Min. gear wheel diameter, mm 20, Pos. 3726-S Inquiry
Request for plano milling machineX 3000 - 4000 mm, Y 2000 - 2500 mm, Pos. 3663-S Inquiry
Request for plano milling machinemind. X 5000 - 7000 mm, Y 2000 - 4000 mm, Bj. vor 1985, Pos. 3694-S Inquiry
Request for plano milling machinemit Ober- u. Seitensupport, X/Y/Z mind. 5000/ 1200/ 800 mm, möglichst mit Magnetspannplatte, Belastbarkeit des Frästisches mind. 10 t, Antrieb mind. 50 kW, Pos. 3637-S Inquiry
Request for plano milling machine Stankoimport o. Uljanovsk UF5220 o. UF5225Tisch 2000 x 6000 mm, Tischgang 6700 mm, Pos. 3552-S Inquiry
Year 1985, table size: 300 mm, speed range: 120 - 140 rpm, control: SINUMERIK 3M-B , weight of machine: 10000 kg, space requirement (W x D x H): 5,26 x 4,025 x 2,58 m, autom. Fräskopfschwenken und -klemmen, Fraskopf zum Diagonalfräsen, separates Hydraulikaggregat, autom. Werkstückwechseleinrichtung, Fräserdurchmesser 163 mm, gr. Breite 230 mm, größter Achsenabstand zw. Frässpindel und Aufspannspindel 265 mm, kleinster Achsenabstand 40 mm, Verstellbarkeit der Frässpindel 170 mm, Frässchlitten schwenkbar bis 90 , Vorschub 2, Ausschaltung selbsttätig und von Hand, Bohrg. Durchmesser 80 mm, Fräsdorn 40/32 mm, elektr. Schneidöl Kühlpumpe 120 l/min., Pos. 14745 Photo Inquiry
bed-type milling machine UNION BF 400 UYear 1998, X: 2000 mm, Y: 700 mm, Z: 750 mm, table size: 650 x 2000 mm, table load: 4000 kg, feed: 2 m/min, speed range: 50 - 4000 rpm, taper fixture: ISO50 , rapid: 7 m/min, spindle drive: approxim. 20 kW, control: Heidenhain TNC 320 , coolant system, weight of machine: approxim. 14000 kg, mit autom. schwenkbarem Fräskopf, Frässpindel-Ø 90 mm, Späneförderer, Kühlmitteleinrichtung 400 l, generalüberholt, mit Garantie, Pos. 9707 Photo Inquiry
CNC- machining centre AXA CB-OYear 1994, X: 500 mm, Y: 320 mm, Z: 400 mm, tool changer: 12 -station, control: Sinumerik , coolant system, chip conveyor, clamp on NC round-table, kompletter Satz Werkzeugaufnahmen, working hours 21.550, Pos. 14254 Photo Inquiry
CNC- machining centre BROTHER TC-R2AYear 2001, tool changer: 14 -station, Bohr- und Fräszentrum mit Schwenktisch (Wechseltisch), Power EIN 45.249 h, Laufzeit 13.458 h, working hours 3.458, Pos. 14553 Photo Inquiry
CNC- machining centre BURKHARDT + WEBER MC 60Year 1990, X: 1000 mm, Y: 800 mm, Z: 800 mm, speed range: 20 bis 4000 rpm, control: Siemens 850 M , coolant system, total power: 65 kW, weight of machine: 31000 kg, Ersatzteilpaket, Werkzeugregelmagazin mit 173 Plätzen, Palettenspeicer Pool 8fach, 3D-Messtastsytem Renishaw, optische Werkzeugbruchkontrolle, Pos. 14467 Photo Inquiry
CNC- machining centre Chiromat FZ 20 CNCYear 1982, X: 500 mm, Y: 400 mm, Z: 265 mm, rapid: 10 m/min, mounting table: 630 x 450 mm, speed range: 20 - 5000 rpm, taper fixture: SK30 , troath: 525 mm, distance spindle - table: 130 - 395 mm, spindle drive: 4,7 kW, tool changer: 10 -station, fully cladded, total power: 18 kW, weight of machine: approxim. 3200 kg, 50 Werkzeugaufnahmen, 20 Werkzeugträger, Pos. 12341 Photo Inquiry
CNC- machining centre CHIRON FZ 26 LYear 1987, X: 1800 mm, Y: 550 mm, Z: 500 mm, rapid: 15 m/min, table size: 800 mm, mounting table: 2600 x 630 mm, troath: 580 mm, distance spindle - table: 170 - 670 mm, speed range: 20 - 6000 rpm, taper fixture: ISO 40 , spindle drive: 11,2 kW, tool diameter: 70 mm, tool changer: 48 -station, control: Siemens Sinumerik 3M , max. drilling: 40 mm, thread cutting capacity: M36/M64x2 mm, max. milling performance: 300 cm³/min, chip conveyor, coolant system, shift operation of the machine: 1 1/2 shift, weight of machine: 9000 kg, space requirement (W x D x H): 5,8 x 3,1 x 3 m, Pos. 12436 Photo Inquiry
CNC- machining centre CHIRON FZ-12 WYear 1989, X: 550 mm, Y: 300 mm, Z: 420 mm, rapid: 40 m/min, speed range: 10500 rpm, tool changer: 20 -station, control: Siemens Sinumerik , B axis: 360 °, Pos. 13318 Photo Inquiry
CNC- machining centre DECKEL FP 5 AX: 710 mm, Y: 600 mm, Z: 445 mm, table size: 630 mm, speed range: 18 - 6300 rpm, taper fixture: ISO 40 , control: Dialog 11 , weight of machine: 4,8 kg, space requirement (W x D x H): 2,15 x 3,80 x 2,40 m, Pos. 14333 Photo Inquiry
CNC- machining centre diverseYear 1990, 6 Stück VMC Bearbeitungszentren YCM 60-600x400x460 / Fanuc YCM 72-860x440x630 / Fanuc Brother-300x220x200 / Brother Dialog Steuerung Hartford-1000x500x510 / Fanuc Rigiva (CB Ferrari)-800x500x500 / Selca Audatronix (Schaublin)-Sinumerik Weitere Informationen auf Anfrage., Pos. 14694 Photo Inquiry
CNC- machining centre DMG DMU 50 VLYear 1997, speed range: 8000 rpm, taper fixture: SK 40 , internal coolant supply, tool changer: 48 -station, electrical hand wheel, chip conveyor, Ideal für Pendelbearbeitung, zwei Starrtische, Pos. 14266 Photo Inquiry
CNC- machining centre DMG DMU 60 EYear 1999, X: 600 mm, Y: 525 mm, Z: 500 mm, Spindle speed: 20 - 12000 rpm, feed: 20 - 10.000 m/min, rapid: x/y 18 m/min./Z 15 m/min, tool holder: SK 40 DIN 2079 , tool changer: 25 -station, mounting table: 1000 x 540 mm, table load: 350 kg, internal coolant supply, electrical hand wheel, coolant system, chip conveyor, control: Heidenhain TNC 430M , spindle mount: SK 40 , control on: 60751 h, machine on: 58147 h, program run: 17836 h, total power: 26 kW, weight of machine: 4500 kg, space requirement (W x D x H): 3,0 x 2,2 x 2,4 m, condition: good , , Head swiveling +/- 90 °, machine in good condition and ready to use, , Documentation, Pos. 15645 Photo Inquiry
CNC- machining centre ENSHU SHW ES 400Year 2002, X: 500 mm, Y: 400 mm, Z: 380 mm, feed: 15 m/min, rapid: 60 m/min, table size: 700 x 400 mm, speed range: 100 - 13000 rpm, spindle drive: 5,5 kW, taper fixture: BT30 , control: Fanuc Series 21i-M , shift operation of the machine: 2 shift, total power: 16,5 kW, weight of machine: 3500 kg, space requirement (W x D x H): 1,233x3,278x2,789 m, Pos. 13966 Photo Inquiry
CNC- machining centre HECKLER + KOCH VBZ 630 LYear 1985, X: 2x 630 mm, Y: 400 mm, Z: 300 mm, speed range: 4000 rpm, taper fixture: SK40 , tool changer: 40 -station, control: HK CNC 783-2 , CNC rotary table: Fibro 360 °, condition: ready for operation , diverses, Pos. 13452 Photo Inquiry
CNC- machining centre HELLER BEA 1Year 1991, X: 630 mm, Y: 500 mm, Z: 630 mm, feed: 10 m/min, rapid: 15 m/min, taper fixture: SK50 , diameter of spindle bearing: 100 mm, internal coolant supply, tool changer: 40 -station, tool breakage detection, control: UniPro 80 , interface: Ethernet , coolant system, chip conveyor, total power: 36 kW, weight of machine: 11000 kg, space requirement (W x D x H): 4,2 x 5,6 x 3,4 m, div. Türme und Aufnahmen, Blum 3D-Messtaster, div. Ersatzteile, Regler, Motoren usw., Almatic 160 Schraubstock, 18 Paletten davon 2 Doppel, Pos. 14213 Photo Inquiry
CNC- machining centre HELLER BEA 2Year 1986, X: 800 mm, Y: 630 mm, Z: 630 mm, pallet size: 630 x 500 mm, speed range: 4000 rpm, taper fixture: SK 50 , internal coolant: 50 bar, tool changer: 40 + 2 x 60 -station, control: Uni Pro NC80C , CNC rotary table: 360° x 1 °, chip conveyor, central lubrication, pallet changer: 2 -station, pallet storage: 8 -station, Pos. 12652 Inquiry
CNC- machining centre HELLER BEA 2Year 1985, X: 800 mm, Y: 630 mm, Z: 630 mm, pallet size: 630 x 500 mm, speed range: 4000 rpm, taper fixture: SK 50 , internal coolant: 50 bar, tool changer: 40-fold + 2 x 60 -station, control: Uni Pro NC 80C , CNC rotary table: 360° x 1 °, pallet changer: 2 -station, pallet storage: 8 -station, coolant system, chip conveyor, central lubrication, total power: 54 kW, Pos. 12646 Photo Inquiry
CNC- machining centre HELLER MCA-H 150Year 1995, X: 630 mm, Y: 500 mm, Z: 560 mm, feed: 24 m/min, rapid: 24 m/min, pallet size: 2x 400 x 500 mm, speed range: 45 - 8000 rpm, taper fixture: SK40 , internal coolant: 50 bar, spindle drive: 30 kW, tool changer: 48 -station, control: Unipro90 , chip conveyor, coolant system, CNC rotary table: 360 °, total power: 60 kW, Pos. 13647 Photo Inquiry
CNC- machining centre HERMLE C 30 UPYear 2004, X: 650 mm, Y: 600 mm, Z: 500 mm, rotary table: 630 °, table load: 800 kg, spindel rotation range: 28000 ltr/min, spindle drive: 23/18 kW, control: Siemens 840 D powerline , feed: 1 - 30.000 m/min, rapid: 60 m/min, tool changer: 117 -station, A axis: +30/-115 °, C axis: 360 °, internal coolant: 1300 l / 80 bar, pallet changer 2 fold: with FASTEMS 500 x 500 mm, outer dimensions: 6,2 x 2,45 x H 2,85 (3,7) m, probe: RENISHAW , chip conveyor, electrical hand wheel, taper fixture: ISO HSK A-63 , total power: 43 kW, weight of machine: 9.500 kg, , 5-axis universal machining center with round swivel table, pallet container for 15 pallets, manual cabin roof, el. Heat compensation, WENGLOR tool breakage monitoring, rinsing gun, Pos. 15231 Photo Inquiry
CNC-machining centre HÜLLER HILLE nb-h 150Year 1988, X: 800 mm, Y: 630 mm, Z: 630 mm, pallet size: 2 fold 630 x 500 mm, taper fixture: SK50 , tool changer: 130 -station, control: Siemens 850 , Pos. 8215 Photo Inquiry
CNC- machining centre HURCO BMC 30 H TYear 1999, X: 660 mm, Y: 355 mm, Z: 455 mm, table size: 1120 x 500 mm, speed range: 0 - 8000 rpm, spindle drive: 7,5 kW, tool changer: 24 -station, control: ULTIMAX 4 , coolant system, total power: 14 kW, documentation, weight of machine: 5000 kg, space requirement (W x D x H): 2,2 x 3,3 x 2,5 m, , Y.O.M. 1999/2017, vertical, electr. handwheel, infinitely variable speed control, Pos. 15320 Photo Inquiry
CNC- machining centre HURCO BMC 30 MYear 1999, X: 760 mm, Y: 460 mm, Z: 610 mm, table size: 1000 x 500 mm, speed range: 80 - 8000 rpm, tool changer: 24 -station, control: Ultimax 4 , spindle drive: 7,5/11,2 kW, tool holder: SK 40 , electrical hand wheel, coolant system, documentation, total power: 14 kW, weight of machine: 4900 kg, space requirement (W x D x H): 2,8 x 2,5 x 2,9 m, , vertical, infinitely variable speed control, the spring package was completely renewed in 2016, in 2017 the spindle was newly supported and balanced and the toothed belt was renewed, Pos. 15323 Photo Inquiry
CNC- machining centre MAG Ex-Cell-O XS211Year 2006, X: 630 mm, Y: 630 mm, Z: 710 mm, speed range: 12.000 rpm, coolant system, chip conveyor, tool holder: HSK 63 , control: MTX (Bosch Rexroth) , weight of machine: 11000 kg, space requirement (W x D x H): 7,0 x 2,0 x 3,2 m, condition: very good , , High-speed machining center with horizontal main spindle, direct measuring systems in all axes, feed speeds X / Y / Z: 60 m / min., B: 60 1 / min, max.forces (X / Y / Z): 17.5 / 20 / 17.5 kN, main spindle (Weiss GmbH), hardly any operating hours, was only used for research purposes at a technical university, Pos. 15565 Photo Inquiry
CNC- machining centre MATRA VMC 1000 AYear 1998, X: 1016 mm, Y: 500 mm, Z: 570 mm, speed range: 8000 rpm, taper fixture: SK40 , internal coolant: 8 bar, spindle drive: 7,5 kW, tool changer: 32 -station, control: Fanuc OM , chip conveyor, ohne Spannwinkel u. Spannfutter, Pos. 10737 Photo Inquiry
CNC- machining centre MAZAK AJV 18Year 1990, control: T32 , Pos. 14554 Photo Inquiry
CNC- machining centre MAZAK V 414Year 1992, X: 560 mm, Y: 410 mm, Z: 460 mm, table size: 900 x 410 mm, table load: 500 kg, feed: 8 m/min, rapid: 24/24/18 m/min, speed range: 60 - 7000 rpm, taper fixture: SK40 , internal coolant: 30 bar, tool changer: 30 -station, control: Mazatrol M-32 , weight of machine: 6600 kg, space requirement (W x D x H): 3,53 x 3,05 x 2,485 m, max. Werkzeug-Ø 100 mm, max. Werkzeuggewicht 10 kg, Spindelmotor 7,5/5,5 kW, Option 4. Achse, Pos. 13808 Photo Inquiry
CNC- machining centre MICRON VC1000Year 1994, X: 1000 mm, Y: 600 mm, Z: 600 mm, table size: 1000 x 600 mm, tool changer: 36 -station, control: Haidenhein TNC 415B, TFT 12.1" , total power: 37 kW, weight of machine: 6500 kg, , Coolant and lubricant technology Interlit HSF1-600ND, chip conveyor PITRAG AG, NE200, Kratzer-0.25 kW, Pos. 15226 Inquiry
CNC- machining centre MIKRON HPM 450 U - 5 AchsenYear 2012, X: 600 mm, Y: 450 mm, Z: 450 mm, electrical hand wheel, handwheel: Heidenhain HR 410 , speed range: spindle 20 - 20000 rpm, taper fixture: HSK 63 without IKZ , tool changer: 60 -station, pallet: 3 Dynafix 280 x 280 pcs., internal coolant: 70 bar, Coolant Container with Paper Belt Filter: 650 ltr., chip conveyor, Infrared Sensor, Cross Conveyor, control: Heidenhain iTNC 530 , spindle on: 8300 h, condition: as new , , APS, ITC - 5 axis, laser tool measurement, new battery, Pos. 15500 Inquiry
CNC- machining centre MIKRON VC 500Year 1993, X: 500 mm, Y: 400 mm, Z: 400 mm, control: Heidenhain TNC 355 , Pos. 14416 Photo Inquiry
CNC- machining centre MIKRON VCE 800 WYear 2002, speed range: 8000 rpm, tool changer: 24 -station, tool holder: IKZ 18 , paper belt filter, control: Heidenhain 426H , control on: 21180 h, machine on: 26400 h, program run: 8500 h, spindle hours: 8500 h, total power: 42 kW, weight of machine: 6500 kg, , 426H control with table probe TTs120 and probe system m&h, indirect measuring system, foil displays of keypad and screen renewed in 2015, spindle motor overhauled in 03/16, , 77 pcs. of several SK40 holders incl. pull stods, table stand for 21 tools, chip cart, Pos. 14470 Photo Inquiry
CNC- machining centre MORI SEIKI MH 63Year 1988, speed range: 6000 rpm, Werkzeughalter, 2 Aufspannwürfel mit 50er Rasterung, Werkzeugvorsteinstellgerät, Pos. 14277 Photo Inquiry
CNC- machining centre NORTE HS 800 SpeedYear 2002, X: 2700 mm, Y: 800 mm, Z: 1000 mm, speed range: 8000 rpm, taper fixture: HKS-A100 , tool changer: 62 -station, control: Siemens Sinumerik 840 D , , 2 horizontal machining centers with linear chain linking 2 x HS 800 Spped each with a co-moving tool magazine for 62 tools (quick changing) HSK-A 100 und each with a steady additional magazine for 92 tools HSK-A 100, adjusted for operation with Renishaw probe, incl. 1 Lenar-pallett-system with 11 disc spaces, 1 setting station, 1 transport trolleys and 12 palletts 800 x800 mm, 4 process chambers (during process in one chamber other workpieces can be put in further chambers), max. oscillating circuit 1200 mm, spindle 32 kW, working hours 8.550, Pos. 14387 Photo Inquiry
CNC- machining centre SCHARMANN Solon 2Year 1996, X: 1200 mm, Y: 1300 mm, Z: 1250 mm, pallet size: 800 x 800 mm, taper fixture: SK50 , control: Sinumerik 840C , max. Palettenzuladung 2000 kg, working hours 80.000, Pos. 13700 Inquiry
CNC- machining centre Sigma Zentis 3Year 1995, X: 1000 mm, Y: 550 mm, Z: 550 mm, speed range: 40 - 8000 rpm, tool changer: 40 -station, 1-schichtig gelaufen, genutzt für Einzelteilefertigung, gut erhalten, Pos. 13293 Inquiry
CNC- machining centre STAMA MC 014Year 1999, X: 500 mm, Y: 380 mm, Z: 300 mm, rapid: 48 m/min, table size: 640 x 380 mm, speed range: 8000 rpm, taper fixture: SK 30 , tool changer: 14 -station, control: Fanuc 16i-M , max. length tool: 250 mm, tool diameter: 80 mm, , workroom luminaire, central lubrication, ball button with light, mist extraction, vise, tool holders 57 + 14, Pos. 14826 Photo Inquiry
CNC- machining centre STAMA MC 325/SYear 1999, Pos. 14738 Photo Inquiry
CNC- machining centre TOSHIBA BMC 80Year 1989, X: 1600 mm, Y: 1120 mm, Z: 1000 mm, pallet size: 3 fold 800 x 800 mm, speed range: 4000 rpm, taper fixture: SK50 , tool changer: 90 -station, control: Toshnuc 600 , total power: 22 kW, Drehtisch 360°, ohne IKZ, div. Werkzeugaufnahmen, Pos. 11298 Photo Inquiry
CNC- machining centre Toyoda FA 800 SYear 2008, X: 1350 mm, Y: 1150 mm, Z: 1150 mm, pallet size: 2 fold 800 x 800 mm, feed: 24 m/min, rapid: 24 m/min, speed range: 10 - 6000 rpm, taper fixture: SK50 , internal coolant: 70 bar, spindle drive: 22/30 kW, tool changer: 60 -station, control: Heidenhain iTNC 530 , weight of machine: approxim. 21000 kg, space requirement (W x D x H): 4,2 x 7,45 x 4,1 m, NC-Tisch 360°, max. Werkzeug-Ø 120 mm, max. Werkzeuglänge 800 mm, max. Werkzeuggewicht 35 kg, Renishaw-Tastsystem, Doppelpalette max. 2500 kg Zuladung, in 2012 kompl. auf Heidenhain umgebaut, inkl. Servomotoren, Siemens Leistungsteile etc., Getriebespindel getauscht, ca. 2500 Betr.std., Pos. 13897 Photo Inquiry
CNC- machining centre Toyoda FH 63 MYear 2001, X: 1000 mm, Y: 700 mm, Z: 650 mm, pallet size: 2 St. 630 x 630 mm, rapid: 30 m/min, speed range: 200 - 20000 rpm, taper fixture: HSK-100 , tool changer: 60 -station, spindle hours: approxim. 200 h, control: Fanuc 15 i , total power: 30/22 kW, weight of machine: 18000 kg, space requirement (W x D x H): 7 x 5 x 3,7 m, Inbetriebnahme 2004 (vorher Messe- und Vorführmaschine), B-Achse 360 x 1°, Renishaw Taster MP 10, Toolsetter, elektronisches Handrad, direktes Wegmesssystem, IKZ, Späneförderer, Knoll Späneaufbereitung, Werkzeugbruchüberwachung, Spindel neu (mit Garantie), sehr gepflegt, einige neuwertige HSK-A100 Aufnahmen, Pos. 13698 Photo Inquiry
CNC- machining centre WAGNER EMB 2150Year 2008, X: 2150 mm, Y: 1400 mm, Z: 1200 mm, table size: 1200 x 1200 mm, control: Siemens 810 D with Shopmill , , horizontal machining center, rotary table as fourth axis, Pos. 14423 Photo Inquiry
CNC- machining centre WAGNER WMC 650Year 2003, X: 650 mm, Y: 510 mm, Z: 510 mm, mounting table: 800 x 450 mm, t-tongues: size/quantity/distance , table load: max. 400 kg, working height: 760 mm, spindle diameter: 65 mm, speed range: 8000 rpm, spindle power: 7/9,25 kW, tool holder: SK 40 , tool changer: 16 -station, tool diameter: 80 mm, max. length tool: 250 mm, max. weight tool: 6 kg, rapid: 16000 m/min, control: Siemens 802D , weight of machine: 3500 kg, space requirement (W x D x H): 2,15 x 2,1 x 2,45 m, condition: working condition , working hour: 9325 h, , Documentation, no futher accessories, Pos. 15740 Photo Inquiry
CNC- machining centre WANDERER Alpha 400Year 1991, X: 600 mm, Y: 560 mm, Z: 760 mm, table size: 500 x 400 mm, table load: 500 kg, speed range: 32 - 6300 rpm, tool changer: 60 -station, taper fixture: SK40 , control: Bosch CC300 , Rundschalttisch 360°, Horiz.-/Vertik. Fräskopf autom. schwenkbar, 2-fach Linear-Palettenwechsler mit 4 x 90° Dreheinrichtung, IKZ, geometrisch überholt, Spindel neu gelagert, alle Führungsabdeckungen überholt, Pos. 9340 Photo Inquiry
CNC- gantry milling machine ANAYAK HVM 6000Year 1995, X: 5300 mm, Y: 1050 mm, Z: 1000 mm, pallet size: 6000 x 1000 mm, feed: 2 m/min, rapid: 1,5 m/min, speed range: 7 - 2300 rpm, taper fixture: SK50 , spindle drive: 25 kW, tool changer: 20 -station, control: Fanuc OMC , Späneförderer, Pos. 10421 Photo Inquiry
CNC- gantry milling machine DROOP + REIN FS 160 GYear 1971, X: 2400 mm, Y: 900 mm, Z: 1000 mm, feed: 3 m/min, speed range: 20 - 1100 rpm, taper fixture: SK60 or SK50 , total power: 56 kW, weight of machine: 36000 kg, mit Reduzierhülse, 3-Achs Digitalanzeige Heidenhain, Pos. 11292 Photo Inquiry
CNC- boring machine SCHARMANN Solon 2Year 1981, X: 1100 mm, Y: 900 mm, Z: 800 mm, taper fixture: SK50 , control: Siemens 8M , Werkzeugspannung und Ölkühleinheit neu in 2012, Pos. 13414 Photo Inquiry
milling machine cnc ATTYear 2006, X: 5000 mm, Y: 2500 mm, Z: 1000 mm, A axis: 0-360 °, B axis: +90 bis -90 °, speed range: 14000 rpm, spindle drive: 2,2 kW, control: ATT 5AX/SRV , weight of machine: approxim. 3000 kg, X-Achse Zahnstangenantrieb, Y-Achse Spindelantrieb, Z-Achse Spindelantrieb m. pneum. Gewichtsausgleich, A u. B-Achse mit Cyclo-Getriebe, Durchlasshöhe 1600 mm, Tisch verstellbare Balken zur Materialaufnahme, optional T-Nutentisch neu, Spannzange bis 12 mm, Pos. 11936 Photo Inquiry
milling machine cnc Bulleri Beta 6Year 1994, X: 1050 mm, Y: 920 mm, Z: 110 mm, table size: 1000 x 1000 mm, speed range: 18.000 rpm, taper fixture: SK 25 , tool changer: 6 -station, max. workpiece dimension: Ø 65 mm, hight 65 mm, control: Bosch CC 120 , total power: 12 kW, weight of machine: 900 kg, space requirement (W x D x H): 1,7 x 1,9 x 2,0 m, , Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift, , 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario, Pos. 14676 Photo Inquiry
milling machine cnc CHIRON FZ 15 WYear 2001, X: 550 mm, Y: 400 mm, Z: 425 mm, table size: 2 x 660 x 400 mm, speed range: 12.000 rpm, taper fixture: SK 40 , tool changer: 20 -station, coolant system, chip conveyor, control: Siemens 840 D , total power: 19 kW, weight of machine: 7.000 kg, space requirement (W x D x H): 3,5 x 2,2 x 2,6 m, , incl. Hilma vices, , Documentation, vices as in the pictures, otherwise no other accessories, Pos. 15568 Photo Inquiry
milling machine cnc CHIRON FZ 22 LYear 1992, X: 2200 mm, Y: 520 mm, Z: 425 mm, feed: 30 m/min, mounting table: 2900 x 570 mm, speed range: 6000 rpm, taper fixture: SK40 , spindle drive: 18,5 kW, control: Fanuc OMC , Indexierung 2x Nikkon Ø 200 mm, Indexiertische, Pos. 13044 Photo Inquiry
milling machine cnc DECKEL DC 70 VYear 1998, X: 700 mm, Y: 550 mm, Z: 500 mm, feed: 10 m/min, rapid: X/Y 30, Z 20 m/min, table size: 900 x 550 mm, table load: 800 kg, distance spindle - table: 150 - 650 mm, speed range: 8000 rpm, taper fixture: SK40 , tool changer: 30 -station, max. weight tool: 12 kg, control: Dialog 112 , total power: 10/15 kW, weight of machine: approxim. 8400 kg, space requirement (W x D x H): 4,3 x 3,3 x 2,9 m, Pos. 13665 Photo Inquiry
milling machine cnc DECKEL DC 70 VYear 1996, X: 700 mm, Y: 550 mm, Z: 500 mm, rapid: X/Y 30, Z 20 m/min, feed: 10 m/min, table size: 900 x 550 mm, table load: 800 kg, pallet size: 2 St. 900 x 550 mm, distance spindle - table: 150 - 650 mm, speed range: 15000 rpm, taper fixture: SK40 , tool changer: 30 -station, control: Dialog 112 , total power: 10/15 kW, weight of machine: approxim. 8400 kg, space requirement (W x D x H): 4,3 x 3,3 x 2,9 m, max. Werkzeuggewicht 12 kg, Wegesensor defekt, Pos. 13664 Photo Inquiry
milling machine cnc DECKEL FP 2 NCYear 1987, control: Dialog 4 , taper fixture: SK 40 , Vertikalspindel mit Pinole, Horizontalspindel mit Gegenlager, Universalwinkeltisch, div. Werkzeuge, working hours 40.000, Pos. 13962 Photo Inquiry
milling machine cnc DECKEL FP 3 CCYear 1989, X: 400 mm, Y: 400 mm, Z: 500 mm, feed: 10 m/min, rapid: 10 m/min, speed range: 18 - 6000 rpm, taper fixture: SK40 , control: Dialog 11 , CNC rotary table: diameter 500 mm - 360 °, condition: very good - only less working hours , Pos. 13686 Photo Inquiry
milling machine cnc DECKEL FP 4X: 600 mm, Y: 500 mm, Z: 400 mm, control: Dialog 4 , Pos. 14415 Photo Inquiry
milling machine cnc DECKEL FP 4A NCYear 1992, X: 560 mm, Y: 500 mm, Z: 390 mm, rapid: 4 m/min, table load: 800 kg, speed range: 4000 rpm, taper fixture: SK 40 , speed range head stock: 4000 rmp, spindle drive: 4 kW, control: Dialog 11 , electrical hand wheel, coolant system, direct path measuring system, documentation, total power: 19 kW, weight of machine: 2900 kg, space requirement (W x D x H): 3,66 x 3,5 x 2,1 m, condition: very good , , less operating hours, can be inspected under power, , complete documentation, Pos. 14636 Photo Inquiry
milling machine cnc DMG 125 U SK 40Year 2002, X: 1250 mm, Y: 880 mm, Z: 800 mm, speed range: 12000 rpm, taper fixture: SK 40 , tool changer: 120 -station, control: Heidenhain Millplus , , Ruler Heidenhein with the print EXACTLY 5 .mu.m, rigid construction of the side unit, Millplus control of the company Heidenhain standard G code, turret for the horizontal and vertical work, tilting table - as 4 axis, machine processed in our operation, working hours 7.420, Pos. 14397 Photo Inquiry
milling machine cnc DMG DMC 80 UYear 2001, X: 800 mm, Y: 700 mm, Z: 600 mm, speed range: 18000 rpm, tool changer: 180 -station, , Lineal Heidenhain with a precision of 5 µm, rigid construction of side section, Millplus control Heidenhain - Standard G-Code, turning head for vertical and horizontal operation, rotatable table as 4th axis, Pos. 14402 Photo Inquiry
milling machine cnc DMG DMC 80U RS4Year 1998, X: 800 mm, Y: 700 mm, Z: 600 mm, speed range: 18000 rpm, tool changer: 120 -station, control: Millplus , , ruler Heidenhain with a precision of 5 µm, rigid construction of side section, Millplus control Heidenhain - Standard G-Code, turning head for vertical and horizontal operation, rotatable table as 4th axis, Pos. 14401 Photo Inquiry
milling machine cnc EMCO EMCOMILL E1200Year 2011, X: 1200 mm, Y: 500 mm, Z: 500 mm, table size: 1300 x 570 mm, speed range: 50 - 12000 rpm, tool changer: 30 -station, coolant system, chip conveyor, rotary table: 200 °, total power: 20 kW, weight of machine: 5300 kg, space requirement (W x D x H): 3000 x 2445 x 2920 m, , Preparation for the 4th axis, mostly used for alluminium machining, is equipped with Renishaw toolprobe TS27and portable handwheel Full documentation also available, working hours 6.369, Pos. 14347 Photo Inquiry
milling machine cnc ENSHU DTL-CenterYear 1992, X: 500 mm, Y: 400 mm, Z: 300 mm, table size: 700 x 400 mm, speed range: 120 - 10000 rpm, tool changer: 10 -station, control: Fanuc Series O-M , weight of machine: 2300 kg, space requirement (W x D x H): 1,12 x 2,5 x 2,54 m, Pos. 14284 Photo Inquiry
milling machine cnc HERMLE UWF 720Year 1985, X: 500 mm, Y: 360 mm, Z: 400 mm, speed range: 40 - 2000 rpm, taper fixture: SK 40 DIN2079 , control: Heidenhain TNC 155 , total power: 6 kW, weight of machine: 2000 kg, space requirement (W x D x H): 2,8 x 2,9 x 1,9 m, condition: good, ready for operation , , under power, ready for inspection, , docmentation, Pos. 14889 Photo Inquiry
milling machine cnc Hwacheon Vesta 1050 BYear 2011, X: 1050 mm, Y: 600 mm, Z: 600 mm, table size: 1150 x 600 mm, speed range: 8.000 rpm, taper fixture: BT 40 , internal coolant: 20 bar, tool changer: 24 -station, control: Fanuc 0i-MD , hours of operation: 31575 h, program run: 8510 h, total power: 40 kW, weight of machine: 7.200 kg, space requirement (W x D x H): 4,0 x 2,2 x 2,7 m, condition: very good , , filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l; chip conveyor AME SB 200, without the pictured vises, , measuring feeler, documentation, 1 piece taper fixture, exhaust unit, Pos. 15588 Photo Inquiry
milling machine cnc Ingersoll Bohle MasterCenter S1500/11Year 1992, X: 5000 mm, Y: 4500 mm, Z: 1500 mm, table size: 1500 x 3000 mm, table load: 10.000 kg, speed range: 20 - 4000 rpm, tool changer: 48 -station, coolant system, chip conveyor, distance between columns: 2000 mm, control: Fidia (2,5 Surfcam für CAD/CAM Software) , documentation, table height over floor: 590 mm, total power: 100 kW, space requirement (W x D x H): 9,05 x 7,15 x 6,325 m, , 5-axis-machine, 4th and 4th axis over rotator, 2 x chip conveyor, portal passage 2000 mm, coolant tank 1500 l, new three-phase servo motor 1FT 5076, Pos. 14475 Photo Inquiry
milling machine cnc Knuth X.mill 1890Year 2012, X: 1800 mm, Y: 920 mm, Z: 700 mm, table size: 1900 x 900 mm, taper fixture: BT50 , tool changer: 24 -station, control: GPlus 450 , electrical hand wheel, chip conveyor, total power: 18,5/22 kW, Ehternet und USB Schnittstelle, vollgekapselter Arbeitsraum, Servoantreib für alle Achsen, pneumatische Werkzeugklemmung, Schaltschrank mit Klimaanlage, Gewindeschneiden ohne Ausgleichfutter, Spänespülsystem, Kühlmittelsystem, Luft- und Kühmittelpistole, autom. Zentralschmierung, Arbeitsraumbeleuchtung, Signallampe, Ausrichtungselemente, Bedienwerkzeug, Bedien- und Parammieranleitung, 4. und 5. Achse als Schwenk-Rundtisch, viele Werkzeugaufnahmen, working hours 2.000, Pos. 14295 Photo Inquiry
milling machine cnc KORRADI-KLOPP UW 3Year 1990, X: 800 mm, Y: 500 mm, Z: 450 mm, control: Heidenhain 355 , Pos. 13290 Photo Inquiry
milling machine cnc LUNAN XH7132AYear 2015, X: 500 mm, Y: 320 mm, Z: 400 mm, table size: 800 x 320 mm, workpiece weight: 300 kg, tool spindle speed: 10.000 rpm, taper fixture: BT30 , tool changer: 20 -station, chip conveyor, coolant system, tool diameter: 100 mm, max. length tool: 200 mm, max. weight tool: 5 kg, feed: 4 m/min, control: FANUC , total power: 3.7 kW, weight of machine: 2400 kg, space requirement (W x D x H): 1,6 x 1,84 x 2,11 m, , distance spindle nose to table/top: 120-520 mm, feed speed x, Y, Z axis: 18000 mm / min, linear bearings on all axles, controllers with various cycles, data transfer via USB or network, spindle for synchronized threads, cutting taps for pecking can put out - and back synchronously, tool store for 255 tools, coolant emulsion or air, larger tool magazine, working hours 100, Pos. 14437 Photo Inquiry
milling machine cnc MAHO 800 TYear 1987, X: 800 mm, Y: 450 mm, Z: 500 mm, feed: 1,5 m/min, rapid: X/Z 4,5, Y 2,5 m/min, table size: 800 x 450 mm, speed range: 63 - 3150 rpm, taper fixture: SK40 , quill ram: 80 mm, control: Heidenhain CNC 332 , ohne die Maschinenschraubstöcke, Pos. 14064 Photo Inquiry
milling machine cnc MAHO MH 600 EYear 1987, X: 600 mm, Y: 450 mm, Z: 450 mm, feed: 4 m/min, rapid: 6 m/min, table size: diameter 500 mm, table load: 250 kg, speed range: 20 - 5000 rpm, taper fixture: ISO 40 , spindle drive: 8 kW, quill ram: 80 mm, tool changer: 20 -station, max. weight tool: 8 kg, control: MAHO 432 , CNC rotary table: 360 °, coolant system, weight of machine: 3100 kg, space requirement (W x D x H): 3,5 x 3,1 x 2 m, hydr. Werkzeugschnellspannung, Spritzschutzkabine, Pos. 13178 Photo Inquiry
milling machine cnc MAHO MH 600 PX: 500 mm, Y: 400 mm, Z: 400 mm, control: Heidenhain TNC 131 , starrer Winkeltisch und Universal-Einbaurundtisch, neue Massstäbe, Pos. 13608 Photo Inquiry
milling machine cnc MAHO MH 600 WYear 1991, control: CNC 234 , working hours 35.000, Pos. 14418 Photo Inquiry
milling machine cnc MAHO MH 700 SYear 1988, X: 700 mm, Y: 500 mm, Z: 600 mm, feed: 4 m/min, rapid: X/Z 12, Y 10 m/min, speed range: 20 - 6300 rpm, taper fixture: ISO40 , quill ram: 80 mm, tool changer: 36 -station, control: Philips CNC 432 , chip conveyor, weight of machine: approxim. 5800 kg, space requirement (W x D x H): 3,73 x 3,58 x 2,48 m, condition: very good , 5 Seitenbearbeitung, div. Aufnahmen, Schiebebleche, Intramat Regler, working hours 55.782, Pos. 12847 Photo Inquiry
milling machine cnc MAHO MH600EYear 1988, X: 600 mm, Y: 450 mm, Z: 450 mm, feed: 1,5 m/min, rapid: X/Y 4, Z 2,5 m/min, mounting table: 254 x 354 mm, speed range: 80 - 4000 rpm, taper fixture: SK40 , quill ram: 80 mm, control: Philipps 432 , weight of machine: 2250 kg, space requirement (W x D x H): 3,291 x 3,175 x 1,91 m, Vertikal-Horizontalspindel, abklappbare Seitenteile, 1-Schichtbetrieb, Generalüberholung 1999-2000, Pos. 13057 Photo Inquiry
milling machine cnc MAZAK VQC 30/50 B 3Year 1986, X: 1500 mm, Y: 760 mm, Z: 508 mm, spindle diameter: 90 mm, coolant system, control: MAZAK MAZATROL CAM-M2 , weight of machine: 8500 kg, space requirement (W x D x H): 3,06 x 4,24 x 3,0 m, , taper holder ISO BT 50, working hours 98.000, Pos. 14433 Photo Inquiry
milling machine cnc RECKERMANN Beta 10Year 2013, Pos. 15563 Inquiry
milling machine cnc Rigiva RS 70Year 1986, X: 550 mm, Y: 500 mm, Z: 400 mm, speed range: 3200 rpm, taper fixture: SK 40 with quill , control: Heidenhain TNC 155 , in 3 Achsen schwenkbarer Tisch, Vollkabine mit Kühlmittelbehälter im Boden, Antriebe von Siemens umgebaut in 2003, Pos. 13068 Photo Inquiry
milling machine cnc SHW UF 11Year 1986, X: 600 (+400) mm, Y: 400 mm, Z: 400 mm, spindle drive: 3,7/4,4 kW, control: CNC 432/9 , autom. Drehzahlwechsel, autom. Werkzeug-Klemmung, Zentralschmierung, starke Indramat-Antriebe MAC 090, 2 x Waldmann Masch.leuchten, Elektrik u. Schaltschrank neu aufgebaut, Pos. 11003 Photo Inquiry
milling machine cnc SHW UF 21Year 1976, feed: 2 m/min, rapid: 4 m/min, speed range: 40 - 2500 rpm, taper fixture: SK40 , spindle drive: 5,9 kW, control: Heidenhain TNL 124 , weight of machine: 5000 kg, space requirement (W x D x H): 2 x 2,7 x 2,7 m, 2004 elektrische Generalüberholung (neue Steuerkette), läuft 1-schichtig, Universalwinkeltisch, Pos. 13967 Photo Inquiry
milling machine cnc VEB Heckert FQW 400Year 1988, table size: 470 x 1600 mm, taper fixture: ISO 50 , control: Heidenhain TNC 131 , total power: 22 kW, weight of machine: 5200 kg, Pos. 13410 Photo Inquiry
milling machine NC/CNC Dörries Scharmann FZ 25-20-06Year 1994, X: 6000 mm, Y: 2500 mm, Z: 2000 mm, feed: 8 m/min, rapid: 13 m/min, table size: 6000 x 2500 mm, table load: 40000 kg, speed range: 2000 rpm, spindle drive: 60 kW, taper fixture: SK 50 , control: Heidenhain TNC 426 , weight of machine: 174000 kg, space requirement (W x D x H): 17,7 x 7,81 x 6,805 m, condition: good , Pos. 14286 Photo Inquiry
X/Y/Z 500/ 500/ 500 mm, X/Y/Z-Achsen gesteuert, Tischgrösse 2000 x 600 mm, SK50, Spindelleistung ca. 5 kW, kein autom. WZW erforderlich, mit Spritzschutzeinhausung, Pos. 3599-S Inquiry
Request for bed-type milling machine HURONX/Y/Z ca. 2400/ 700/ 800 mm, HSK63, Tisch 2800 x 600 mm, Spindel 100 - 14000 U/min., Pos. 3586-S Inquiry
Request for bed-type milling machine ZAYER 3000 BF 3Pos. 3693-S Inquiry
Request for CNC- machining centre vertikal, mit Siemens-Steuerung 810 D oder 840 D, X = 600 bis 1000 mm, IKZ, ab Bj. 1998, Pos. 3634-S Inquiry
Request for CNC- machining centre Palettengröße 1000 x 1000, ab Bj. 2000, horizontal, Pos. 3495-S Inquiry
Request for CNC- machining centre horizontal, 2-fach Paletten 800 x 800 mm, mind. 40-fach WZW, Aufnahmen BT50, Steuerung Fanuc, ca. 22 kW, Pos. 3679-S Inquiry
Request for CNC- machining centre X/Y/Z 600 - 1000/ 600 - 1000/ 600 - 1000 mm, Steuerung Siemens/Fanuc/Heidenhain, HSK63A oder ISO40, mind. 60 - 320 WZ, ab Bj. 2002, Pos. 3574-S Inquiry
Request for CNC- machining centre Palettengrösse 630 x 630 mm, SK50, mit mind. 100 Magazinplätzen, mind. 6 Palettenplätze, Pos. 3576-S Inquiry
Request for CNC- machining centre CHIRON FZ 08 KSab Bj. 2002, mit Drehspindel, Pos. 3543-S Inquiry
Request for CNC- machining centre DECKEL 160 Pab Bj. 2002, Pos. 3497-S Inquiry
Request for CNC- machining centre DECKEL 200 Pab Bj. 2002, Pos. 3496-S Inquiry
Request for CNC- machining centre DMG DMC 103 VSiemens-Steuerung, Pos. 3692-S Inquiry
Request for CNC- machining centre DMG DMC 103 VHeidenhain-Steuerung, IKZ, Pos. 3611-S Inquiry
Request for CNC- machining centre DMG DMU 125 P hi-dyn o. Hermle C40/C50ab Bj. 2005, mit Heidenhain-Steuerung, WZW und NC-Schwenkfräskopf, Pos. 3595-S Inquiry
Request for CNC- machining centre DMG DMU 60 UPos. 3540-S Inquiry
Request for CNC- machining centre DMG DMU 70 oder DMU 70evoab Bj. 2005, 5 Achsen, mit Heidenhain-Steuerung oder ähnl. grössere Maschine, Pos. 3546-S Inquiry
Request for CNC- machining centre Haas VF8 oder VF9ab Bj. 2006, Pos. 3500-S Inquiry
Request for CNC- machining centre HECKERT CWK 400Pos. 3709-S Inquiry
Request for CNC- machining centre HERMLE C30, C40 dynamic oder C250, 5-axis, control Heidenhain, HSK-63 Spindle, 18,000 rpm., optionally Blum laser and additional magazine, YOM after 2007, in good optical condition, Pos. 3754-S Inquiry
Request for CNC- machining centre HURCO VTX Uab Bj. 2008, Pos. 3622-S Inquiry
Request for CNC- machining centre MIKRON VC 1000vertikal, Steuerung Heidenhain TNC 426, Pos. 3635-S Inquiry
Request for CNC- machining centre OKUMA VR 40IIPos. 3523-S Inquiry
Request for CNC- machining centre STAMA MC 014Pos. 3618-S Inquiry
Request for CNC- machining centre SW (Schwäb. Werkzeugm.) BA 400-4 (oder 2), BA 600-4 (oder 2)Pos. 3588-S Inquiry
Request for CNC- machining centre Toyoda FH 63 Seilt sehr, Pos. 3665-S Inquiry
Request for milling machine cncX/Y/Z mind. 4000/ 1250/ 1500 mm, Steuerung Heidenhain TNC, ISO50, Späneförderer, Werkzeugwechsler, ab Bj. 2001, Pos. 3613-S Inquiry
Request for milling machine cnc CME FS1gerne mit Werkzeugwechsler und schwenkbarem Kopf, Pos. 3762-S Inquiry
Request for milling machine cnc HAAS MiniMillPos. 3774-S Inquiry
Request for milling machine cnc Haas ST 20Pos. 3695-S Inquiry
Request for milling machine cnc Hedelius BC 100 C80 MagnumBj. 1998 - 2002, Pos. 3489-S Inquiry
Request for milling machine cnc HERMLE U 1000 A5 Achsen, Pos. 3657-S Inquiry
Request for milling machine cnc HERMLE UWF 1000X ca. 700 - 800 mm, Steuerung Heidenhain TNC 155-355 (auch defekt), SK40, Pos. 3584-S Inquiry
Request for milling machine cnc HURCO BMC 30 oder 40/20 VMXPos. 3598-S Inquiry
Request for milling machine cnc MAHOMH 800 / MH 1000n oder MH 1200, Pos. 3743-S Inquiry
Request for milling machine cnc MAHO 800 Cab Bj. 1991, mit NC-Rundtisch, Pos. 3596-S Inquiry
Request for milling machine cnc MIKRON 1850Pos. 3499-S Inquiry
Request for milling machine cnc Starag Heckert CWK 1000 oder CWK 1200Bj. 1998 - 2002, Pos. 3490-S Inquiry
Request for milling machine cnc Wabeco D3000 o. D4000E o. D6000Pos. 3626-S Inquiry
Request for Graphitfräsmaschine OPS oder Rödersmit Elektrodenwechsler, Pos. 3498-S Inquiry
Request for bed-type milling machineFräslänge 2500 - 3000 mm, Tischreite 500 - 600 mm, Z-Achse bis 600 mm, max. Bauhöhe 2700 mm, Pos. 3573-S Inquiry
Year 1985, 9 Stat. u. 5 Alzmetall-Abomaten, 2x Abo. 50 vertikale Einheiten, 3x Abomaten 30 vertikale Einheiten, 4x Horizontaleinheiten Honzberg, Rundtakt-Drehtisch Ø 1500 mm, ca. 10 t, Pos. 8566 Photo Inquiry
revolving transfer machine PFIFFNER HW 25Year 2007, control: Simens Simatic S7 , , Loading magazine Pfiffner 5.07.017-27, hinge belt conveyor Ruez SFWW2 / 412 S, coolant system Ruez 1900l, 3 pressures: 2 bar, 4.4 bar, 100 bar, scraper conveyor Ruez KFOW 2/1488 DAS, flatbed belt filter Ruez BFO 330/55, belt skimmer Ruez BSK 100/750-V, KS centrifuge RUMA MZ35, KS recooler BKW DL115V-2KK, Pos. 15339 Photo Inquiry
mit Drehmontagetisch, Pos. 3650-S Inquiry
Request for revolving transfer machine OKUMAT8 - 16 Stationen, Wendelförderer, Linearförderer, Pos. 3507-S Inquiry
Year 1965, max. Werkstück-Ø 400 mm, max. Länge der Verzahnung 290 mm, Werkstücktisch-Ø 400 mm, Tischbohrung Ø 80 mm, Werkstückdorn Ø 36 mm, max. einspannbarer Fräser Ø 160 mm, Länge 160 mm, Fräser-Drehzahlen 40 - 250 U/min., Leistung 17 kW, Masch.gewicht ca. 4600 kg, Abm. 3,01 x 1,8 x 2,2 m, Pos. 13573 Photo Inquiry
gear hobber PFAUTER PE 300Year 1991, Frässpindel Steil-Kegel 50 , Fräser-Ø 200 mm, max. Breite 280 mm, min./max. Abstand zw. Fräser u. Werkstückachse 25/ 270 mm, max. Axialschlittenweg 400 mm, Tangentialschlitten 300 mm, Steuerung Sinumerik 3M, Frässpindel-Drehzahlen 100 - 450 U/min., Werkstück-Nenn-Ø 350 mm, Maschinen-Nennmodul ca. 8 mm, Schneidöl-Kühlpumpe 150 l/min., Gewicht 11000 kg, div. Zubehör, Pos. 11821 Photo Inquiry
Zahnradwälzfräsmaschine TOS OFA 32 AYear 1996, max. FräsØ 320 mm, max. Fräshöhe 230 mm, 7,5 kW, max. Fräser 1", Drehzahl 71 - 450 U/min., Masch.gewicht ca. 6200 kg, Abm. L/B/H 2520 x 2390 x 1820 mm, ohne Zubehör, Pos. 14160 Photo Inquiry
Year 1997, für Hermle U 630 mit TNC 410 (Heidenhain), fast nicht benutzt, Pos. 14090 Photo Inquiry
Clamping field 3R 3Refix 3R-935-56.40 02Working Area: 560 x 400 x 32 mm, , Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100, Pos. 15420 Photo Inquiry
clamping tableAufspannfläche 2200 x 2200 mm, Verfahrweg 1500 mm, Rundtisch 360°, Tischbelastung ca. 25 t, Zentralschmierung-Zahnstangenantrieb-Längs, Gewicht ca. 16 t, Pos. 11666 Photo Inquiry
Hochleistungsspindel IBAG HF 100effektive Drehzahl 24000 U/min., Fräser-Ø 10 mm, passend für Deckel FP F4 Dialog 11, Spindel-Dauerleistung 4 kW, guter Zustand, Pos. 11459 Photo Inquiry
round table Nikken CNC-100 1war an einem Bearbeitungszentrum Brother TC-215 angebaut, manuelle Wechselvorrichtung, Interface, Reitstock, Pos. 12941 Photo Inquiry
round table Sillem 134 - S/5Year 1983, für Innenschleifen, 4 Arbeitsstationen + 1 x Entnahme bzw. Beladen, Pos. 11829 Photo Inquiry
round table Sillem 134 - S/7Year 1987, für Außenschleifen, 6 Arbeitsstationen + 1 x Entnahme bzw. Beladen, Pos. 11828 Photo Inquiry
Starrtisch DECKEL FP 4 NC900 x 530 mm, Gewicht 180 kg, einwandfreier Zustand, kaum gebraucht, auf Euro-Palette, Pos. 12944 Photo Inquiry
dividing head LOEWErotary table: 360 °, rotary axis Ø: 400 mm, space requirement (W x D x H): 0,7 x 0,6 x 0,2 m, weight of machine: 240 kg, condition: good , Pos. 15478 Photo Inquiry
dividing head WALTER TANi 125 NEG-CNCYear 2002, kpl. mit Steuerung, Magnetventil, 3-Backenfutter, Dokumentation, Anbindung an CNC-Fräsmaschine möglich, nur als Digitalisierungsmaschine genutzt, working hours 50, Pos. 6445 Photo Inquiry
dividing head WALTHER RfL 500 K 10Tisch-Ø 500 mm, sehr guter Zustand, Pos. 13927 Photo Inquiry
Year 1990, rotary table: 360 °, rotary axis Ø: 1250 mm, rotary encoder: Heidenhain ROD 456 400 Pulse/U , weight of machine: 1570 kg, space requirement (W x D x H): 1,4 x 1,6 x 0,5 m, total power: 0,5 kW, condition: very good , , Connection for built-in rotary encoder, connection for built-in reference switch/limit switch. Rotary table is driven by a three-phase motor, left/right rotation, manual clamping, table was used exclusively for test purposes, table surface with T-slots 22-H12 DIN 650, degree scale/ruler around the table, , Documentation, Pos. 15707 Photo Inquiry
400 x 3000 - 5000 mm, Pos. 3520-S Inquiry
Request for Stangenfräsmaschine STAMAmit oder ohne Drehoption, Pos. 3575-S Inquiry
|
||||||||||||||||||||||||||||||||||
