 |
UsedMachines-Journal.de |
   |
|||
|
|||||
|
||||||||||
 |
Saws - FilingYear 1998, troath: 440 mm, cutting hight: 300 mm, total power: 1,5 kW, weight of machine: 150 kg, , wood bend saw, Pos. 15403  Photo  Inquiry
Ø 310 - 340 mm, mit Vorschub, Pos. 3593-S Inquiry
Year 2013, cutting diameter: 400 mm, section thickness: 500 mm, sectional area 90° circular: 400 mm, sectional area 90° flat: 500 X 400 mm, cutting speed: stepless from 15 to 150 m/min, working height: 750 mm, saw blade dimensions: 6220 X 41 X 1,3 mm, remaining piece length: automat 110 mm, smallest diameter: 5 mm, chip conveyor, feed length: 0 - 600 mm, lowering speed: 0 - 750 mm/sec., material weight: 500 kg, working hour: 4500 h, total power: 8,0 kW, weight of machine: 1950 kg, space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m, Cutting area rectangle: 500 x 410 mm, , neat machine, without roller conveyors, , 2 new saw blades, documentation, Pos. 15451 Photo Inquiry
band-saw horiz. AMADAPos. 15655 Photo Inquiry
band-saw horiz. Metora MB250/10Year 1985, Schnittbereich Ø 250 mm rund, inkl. Zufuhrrollenbahn 1 St. 3 m + 1 St. 1 m, Abfuhr 3 m mit Materialanschlag, Auflagehöhe 900 mm, alle Rollen sowie die Führung des Messanschlages sind fabrikneu, neue Maschinenelektrik, generalüberholt, Pos. 11989 Photo Inquiry
band-saw horiz. PEHAKA HS340Year 1976, cutting diameter: 340 x 200 mm, sectional area 45° circular: 230 mm, cutting speed: 20 - 120 m/min, stop: 600 mm, saw blade dimensions: 4770-4870 x 32 x 1 mm, total power: 4 kW, weight of machine: 1400 kg, space requirement (W x D x H): 2,6 x 1,4 x 1,6 m, , semi-automatic operation, robust machine, good condition, ready to use, Pos. 14740 Photo Inquiry
Automatic Band Saw BEHRINGER HBP 303AYear 1997, cutting diameter: 300 mm, cutting speed: 19 - 130 m/min, saw blade dimensions: 4650 x 1,3 x 41 mm, cutting length: min. 10 mm, Square Material: 300 x 300 mm, Workpiece Clamping: hydraulic , table height over floor: 800 mm, feed: 0 - 200 m/min, chip conveyor, coolant system, roller conveyor: 2 m, total power: 8,0 kW, weight of machine: 2500 kg, space requirement (W x D x H): 3,5 x 2,3 x 2,1 m, condition: good , , automatic feed, piece counter, 2 m roller conveyor, good condition, can be used immediately, , documentation, Pos. 15582 Photo Inquiry
automatic band-saw BEHRINGER HBP 320 AYear 1979, cutting diameter: 320 mm, cutting width: 320 mm, cutting hight: 320 mm, weight of machine: approxim. 300 kg, total power: 3 kW, incl. 2 Rollengänge, elektr. Schaltpläne und 2 Sägebänder, Sägeblattabmessungen: ca. 1,1 mm dick x 34 mm hoch x 4860 mm (inkl. Sägezähnen), Nachschubgreifer Hubweg 800 mm, kann unter Strom besichtigt werden, Pos. 10593 Photo Inquiry
automatic band-saw TMJ 700Year 2012, sectional area: round material 700 mm, sectional area 90° flat: 700 x 700 mm, cutting speed: 10 - 115 m/min, feed: 0 - 12 m/min, control: B+R (Berner und Reinecker) , total power: 7,5 kW, weight of machine: 3600 kg, space requirement (W x D x H): 3,1 x 3,0 x 2,25 m, , bundle cutting at 90 ° 700 x 700 mm, , 2 rollerways each 2 m in front of the saw, 1 rollway 3 m behind the saw, 11 saw bands for processing of tubes and hardened steel (l x w x h) 8200 x 67 x 1,6 mm, working hours 100, Pos. 14610 Photo Inquiry
CNC- automatic band-saw KASTO SSB 260 VA/PMYear 1988, cutting diameter: 10 - 260 mm, cutting speed: 15 - 125 m/min, weight of machine: approxim. 7000 kg, total power: 15 kW, space requirement (W x D x H): 13,3 x 4,4 x 2,4 m, Schnittbereich vierkant 10 x 10 - 260 x 260 mm, Sägebandabmessungen 4115 x 38 x 1,3 mm, Sägemotor ca. 4 kW, kleinste Abschnittlänge 10 mm, Kühlmittelbehälter ca. 85 l, Pumpenleistung 75 l/min., Kettenmagazin Stangenlänge 500 - 7000 mm, Pos. 14200 Photo Inquiry
CNC- automatic band-saw KASTO SSB 260 VA-PMYear 1994, cutting diameter: max. 180 mm, weight of machine: 7000 kg, 15 kW, inkl. Ladestation mit 8 Lagerplätzen, Pos. 13940 Photo Inquiry
Gehrungs-Bandsäge PEHAKA HS350/520GBSYear 1991, saw blade dimensions: 6000 x 32 mm, sectional area 45° circular: 310 mm, square-section area 45°: 310 x 350 mm, sectional area 90° circular: 350 mm, square-section area 90°: 30 x 520 mm, cutting speed: 20 - 110 m/min, weight of machine: 4000 kg, total power: 4 kW, space requirement (W x D x H): 3,5 x 3,6 x 2,5 m, Schnittbereich 90° Quadrat 350 x 350 mm, +/- 75° vierkant 350 x 480 mm, +/- 60° vierkant 350 x 400 mm, Gehrungsschnitt (Winkeleinstellung) manuell verschiebbar, hydr. Bandspannung, Maschine auf Drehteller mit Späneförderer, Längenmessanschlag manuell verstellbar, div. Ersatz-Sägebänder, Pos. 13439 Photo Inquiry
automatic band-saw TRENNJÄGER1200 x 1000 x 1500 mm, Umlenkrollen mit Ø 400 mm, Stahlprofilunterbau, Motor 2,2 kW, Schalt- & Bedieneinrichtung, Klemmeinrichtung, Zubehör, Pos. 12818 Photo Inquiry
Kleine Maschine, automatischer Vorschub, so dass auch 6 m Stangen gesägt werden können, Pos. 3758-S Inquiry
Request for band-saw - horizontal cnc KASTO SBA 260 AU (SBA A2)Pos. 3716-S Inquiry
Request for automatic band-saw MEBA 335 DG, YOM 2005, Pos. 3745-S Inquiry
Year 1996, cutting diameter: 280 mm, saw blade diameter: 500 mm, mitre cut: 45 -/+ degree, coolant system, documentation, total power: 2,5 kW, weight of machine: 500 kg, space requirement (W x D x H): 1,7 x 0,6 x 1,1 m, , hydraulic hack-saw, wingspan approx. 400 mm, vice height 175 mm, sawing speed 3 selection levels, length stop, Pos. 15394 Photo Inquiry
hack-saw CARIF 240cutting diameter: 240 mm, saw blade dimensions: 400 x 38 x 2 mm, stroke per min.: 75 / 150 per min, coolant system, feed lenght: 600 mm, total power: 2,5 kW, weight of machine: 750 kg, space requirement (W x D x H): 1,5 x 2,2 x 1,0 m, , Emergency stop button, Pos. 15336 Photo Inquiry
Year 1978, cutting diameter: 100 mm, saw blade dimensions: 280 mm, speed range: 10, 20, 40, 80 rpm, sectional area 90° flat: 120 x 100 mm, sectional area 90° circular: 100 mm, length stop: 500 mm, total power: 1,5 kW, weight of machine: 700 kg, condition: good , , semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply, , 18 saw blades, roller conveyor 2 m, Pos. 14563 Photo Inquiry
circular saw KASTO GKS 400 AMYear 1994, saw blade dimensions: diameter 400 mm, sectional area 45° flat: 160 x 80 mm, sectional area 45° circular: Ø 130 mm, square-section area 45°: 110 mm, mitre cut: 0 - 60 -/+ degree, Schnittbereich 0° Rechteck 210 x 80 mm, Quadrat 110 mm, Rund Ø 130 mm, Pos. 14215 Photo Inquiry
circular cold sawing machine EISELE KMS II/061Year 1979, cutting diameter: 100 mm, sectional area 90° flat: 100 x 90 mm, mitre cut: 90 / 45 -/+ degree, saw blade dimensions: HSS Z=140 ZT 06 275 x 2,5 x 40 mm, speed range: 40 / 80 rpm, coolant system, condition: good , total power: 1,4 / 1,9 kW, weight of machine: 250 kg, space requirement (W x D x H): 0,7 x 0,9 x 1,6 m, , Wheel stand, , limit-stop 1 m, vice, new saw blade, Pos. 15713 Photo Inquiry
circular cold sawing machine KALTENBACH KKS 400 NAPos. 14231 Photo Inquiry
circular saw Rohbi RKA 64Year 1988, saw blade dimensions: diameter max. 300 mm, cutting diameter: 70 mm, speed range: max. 3500 rpm, Rohre u. Profile mit Bundlademagazin, Rohrlänge max. 8000 mm, vollautom. Vereinzelung u. Zuführung zur Säge, Siemens-Simatic-Steuerung, Sägeblatt-Drehzahl regelbar, Fixlängen-Vorschub mit Kugelrollspindel, modernisiert 2004, Pos. 12126 Photo Inquiry
circular saw ULMIA 1631Year 1987, table size: 680 x 500 mm, cutting width: 1,6 / 2,5 mm, saw blade diameter: 160 bis 300 mm, total power: 1,1 kW, weight of machine: 210 kg, space requirement (W x D x H): 1,0 x 0,8 x 1,0 m, , Circular saw with multi-stage manual transmission for a variety of small-shaped materials, such as: rods, tubes, profiles, plates, made of non-ferrous metals and conductive metal, hard papers, plastics and plastic materials of all kinds. Travel distance (via hand wheel): approx. 200 mm (cutting length), 12 speed levels 90 - 4000 rpm, bore 32/40 mm, Pos. 14808 Photo Inquiry
circular saw unbekanntcutting diameter: 220 mm, total power: 1,5 kW, weight of machine: 150 kg, , hydraulic circular saw, cutting diameter round 75 mm, Pos. 15152 Photo Inquiry
automatic circular sawing KALTENBACH KKS 401 NAYear 1990, weight of machine: approxim. 1950 kg, space requirement (W x D x H): 1,17 x 1,07 x 1,96 m, Sägeblatt-Ø 425 mm, Schnittbreite 5 mm, Aufnahmebohrung 50 mm, Anzahl der Mitnehmerbolzen 4 Stück, Teilkreis der Mitnehmerbolzen 80 mm, Ø der Mitnehmerbolzen 13 mm, Sägeblattvorschub 1200 mm/min., Schnittgeschwindigkeit bei Blatt-Ø 400 mm - 2-stufig mit Kette 10/20, 13/26 und 15/30 m/min, Anschlußwert 5,5 kW, Pos. 13554 Photo Inquiry
automatic saw TRENNJÄGER PMC 108Year 1983, saw blade dimensions: diameter 660 mm, cutting diameter: 200 mm, total power: 7,5 kW, weight of machine: approxim. 3800 kg, Schnittgeschwindigkeit 14 - 44 m/min., Schnittlänge 1000 mm, voll funktionsfähig, Pos. 14055 Photo Inquiry
autom. circular cold sawing machine TRENNJÄGER PMC 108Year 2007, saw blade dimensions: 660 mm, cutting diameter: 200 mm, cutting length: 800 mm, total power: 7,5 kW, weight of machine: 3800 kg, Schnittgeschwindigkeit: 14 - 44 m/min., Pos. 13214 Photo Inquiry
automatic saw KALTENBACH KKS 401 NAYear 1992, cutting speed: 6 - 30 m/min, saw blade dimensions: 400 (425) x 50 x 5 mm, sectional area 45° flat: 180 x 40 mm, sectional area 90° flat: 240 x 70 mm, sectional area 90° circular: 140 mm, square-section area 90°: 130 mm, mitre cut: continuously 60 -/+ degree, saw blade feed: 0 - 1.200 mm/min, Minimum quantity lubrication system: KKS 401 115326 , Autom. Flat magazine FMA for bars: 1500 - 7000 mm, control: Kaltenbach MULTI-COM , chip conveyor, total power: 5,5 kW, weight of machine: 4500 kg, space requirement (W x D x H): 9,45 x 2,59 x 2,1 m, hours of operation: 17290 h, condition: very good , , fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC), serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation, , 2 saw blades, Pos. 15529 Photo Inquiry
, Can be defektive!, Pos. 3742-S Inquiry
Request for autom. circular cold sawing machine KALTENBACH KST 400Pos. 3696-S Inquiry
Request for circular saw BERG + SCHMIDT VKS 315vertikal, Drehzahl 17 + 33, für Stahl und Edelstahl, Pos. 3699-S Inquiry
auf Rollbahn, funktionsfähig, Pos. 13494 Photo Inquiry
Year 1978, Pos. 12710 Photo Inquiry
Pos. 3545-S Inquiry
|
||||||||||||||||||||||||||||||||||
